Check to see if the rivet passes through both metal sheets at once and is not obstructed from underneath. Insert the rivet’s head through the metal sheets’ holes. So that the rivet can be secured, let go of the trigger. The head of your rivet should be extended between the teeth, with the pin facing the gun’s rear. As far as you can, insert the metal rivet into the tool so that it rests on a chuck at the back of the gun. With one hand holding your rivet, depress the trigger to release the holding arms. In order to fit the rivet, place two sheets of metal side by side with the holes overlapped. These can have small holes already drilled into them or you can use a drill to make them. The metal sheets should then be laid out. Light metal rivets have a tendency to break, so it is wise to take all necessary precautions. Put on your protective gloves and eyewear before continuing. Steps To Using A Rivet Tool Step 1: Prepare Although they are not always attractive and do protrude slightly, the connection is very strong. The round flange is on the front side, and on the back is a crumpled-up mass of malleable aluminum that serves as a nut after the stem separates from the head after a few squeezes. The “rivet” is compressed and widened as a result of being drawn up against the backside with each squeeze. The fastener head is fed into a guide hole through both mating parts.

Once the flange is flush against the front side of the workpiece, you simply squeeze the tool handles together. It is typically made of aluminum and has a malleable head and a steel stem.

The pop rivet itself is a tiny fastener that fits into the throat of a pop rivet gun. Read on as we discuss the advantages and disadvantages of each kind of riveter. Although not all rivet guns are created equal, it is simple to determine which kind is required for a given application.

Use pop rivet tool